Kia Sorento: Starter Removal - Starting System - Engine Electrical SystemKia Sorento: Starter Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Starting System / Starter Removal

1.
Disconnect the battery negative terminal.
2.
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
3.
Remove the ETC module.
(Refer to Fuel System - "ETC")
4.
Remove the intake manifold stay (A).

5.
Disconnect the starter cable (A) from the B terminal on the solenoid, then disconnect the connector (B) from the S terminal.
6.
Remove the 2 bolts (C) holding the starter, then remove the starter.
7.
Remove the 2 bolts holding the starter, then remove the starter (A).

Starter Circuit Diagram
...
Starter Installation
1. Install in the reverse order of removal. Starter installation bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)...
See also:

Single-Use Parts
Single-Use Parts Non-reusable parts (Single-Use Parts) Workshop manual provides “Components and Components Location” which can be used to identify “Non-reusable ...

Troubleshooting
Troubleshooting Water leaks Components Suspected Cause Correction Movable Gla ...

Steering Gear box Removal
1. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0671