Kia Sorento: Starter Installation - Starting System - Engine Electrical SystemKia Sorento: Starter Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Starting System / Starter Installation

1.
Install in the reverse order of removal.

Starter installation bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

Starter Removal
1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanical System - "Air Clean...
Starter Disassembly
1. Disconnect the M-terminal (A) on the magnet switch assembly (B). 2. After loosening the screws (A), detach the magnet switch assembly (B). ...
See also:

Front Oil Seal Removal and Installation
1. Remove the crankshaft damper pulley. (Refer to Timing System - "Crankshaft Damper Pullty") 2. Remove the front oil seal(A). ...

Trouble Symptom Charts
Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surgin ...

Pressure Sensor Installation
   ...

Copyright © xm.ksmanual.com 2014-2026 - 0.053