Kia Sorento: TPMS Receiver Operation
|
1. |
General Function
| A. |
Auto learn takes place only once per Ignition cycle.
|
| B. |
On successful completion.
|
| C. |
Until Auto-learn completes, previously learned sensors
(together with their respective locations) are monitored for
under inflation / leak warnings.
|
| D. |
Spare tire inflation / DTC state is not displayed.
|
|
|
2. |
General Conditions to Learn New Sensors:
| A. |
Auto learning only functions when speed is more than 25
kph (approx. 15 mph).
|
| B. |
Receiver must determine that it is confident that sensor
is not temporary:
|
| 2) |
Uses confidence reduction of previously learned
sensors.
|
|
| C. |
Typical time at driving over 25 kph to learn a new sensor
is up to 10 minutes.
|
|
|
3. |
General Conditions to Un-Learn a sensor that is removed:
| A. |
It takes less than 10 minutes at 20~30kph.
|
| B. |
Confidence reduction is dependant on vehicle speed and
the number of sensors known to the receiver.
|
|
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this
state. Replacement par...
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
2)
...
See also:
Description
System Outline
An optimal seat position set by a driver can be memorized in Power seat
unit by IMS SW, which enables restoration of seat position set by the driver
despite
Pl ...
Emergency starting
Connect cables in numerical order and disconnect in reverse order.
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle ...
Engine Cover Removal and Installation
1.
Remove the engine cover (A).
2.
Install in the reverse order of removal.
...
TPMS Receiver Description
TPMS Receiver Replacement
