Kia Sorento: Trailing Arm Replacement - Rear Suspension System - Suspension SystemKia Sorento: Trailing Arm Replacement

Kia Sorento (XM, 2011-2015) Service Manual / Suspension System / Rear Suspension System / Trailing Arm Replacement

1.
Remove the rear wheel & tire.

Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

  
Be careful not to damage to the hub bolts when removing the front wheel & tire (A).
2.
Loosen the nuts & bolts and then remove the trailing arm (A) with the rear axle.

Tightening torque
Bolt: 34.3 ~ 53.9N.m (3.5 ~ 5.5kgf.m, 25.3 ~ 39.8lb-ft)
Nut: 6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0lb-ft)

[2WD]

[4WD]

3.
Loosen the parking brake cable bracket bolt (A) & height sensor bracket bolt (B).

Tightening torque
A: 9.8 ~ 16.7N.m (1.0 ~ 1.7kgf.m, 7.2 ~ 12.3lb-ft)
B: 3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)

[2WD]

[4WD]

4.
Loosen the mounting bolt and then remove the trailing arm (A) with the frame.

Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

5.
Installation is the reverse of removal.
Rear Coil Spring Inspection
1. Check the spring for distortion, aging or damage. 2. Check the spring upper pad and lower pad for aging or damage....
Rear Assist Arm Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...
See also:

Front Body E
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Hood hinge m ...

Rear Lower Arm Inspection
1. Check the bushing for wear and deterioration. 2. Check the rear lower arm for deformation. ...

Starter Cleaning
1. Do not immerse parts in cleaning solvent. Immersing the yoke assembly and/or armature will damage the insulation wipe these parts with a cloth only. ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0491