Kia Sorento: Windshield Glass Removal
| •
|
Put on gloves to protect your hands.
|
| •
|
Use seat covers to avoid damaging any surfaces.
|
|
|
1. |
Remove the following parts.
| B. |
Inside rear view mirror
|
| C. |
Rain sensor
(Refer to "Rain Sensor" in BE group)
|
| D. |
LDWS unit
(Refer to "LDWS Unit" in BE group)
|
| E. |
Auto defog sensor
(Refer to "Auto Defog Sensor " in HA group)
|
| H. |
Windshield glass deicer connector
(Refer to "Windshield Deicer" in BE group)
|
|
|
2. |
Using a screwdriver or remover, remove the windshield moulding
(A).
|
|
3. |
Cut out the sealant using the sealant cutting tool (09861-31100).
|
|
4. |
Remove the windshield glass (B) carefully using the glass holder
(A).
|
1. Windshield side moulding
2. Windshield glass...
1.
With a knife, scrape the old adhesive smooth to a thickness of
about 2mm (0.08 in.) on the bonding surface around the entire windshield
opening flange :
A.
...
See also:
Curtain air bag
Curtain airbags are installed securely along both interior roof rails, stretching overhead above the front and rear
entry doors of the cabin.
...
In-car Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the center fascia panel
(A).
...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to ...
Windshield Glass Components
Windshield Glass Installtion
