Kia Sorento: 4WD ECU Installation - 4WD Control System - 4 Wheel Drive (4WD) SystemKia Sorento: 4WD ECU Installation

Kia Sorento (XM, 2011-2015) Service Manual / 4 Wheel Drive (4WD) System / 4WD Control System / 4WD ECU Installation

1.
Install in the reverse order of removal.
2.
Prior to installing a new ECU, upload the original ECU
    4WD ECU Removal
    1. Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learing with the GDS tool. (Refer to 4WD Control System - "Repair procedures") ...
    Coupling Assembly
    ...
    See also:

    Auto Light Sensor Inspection
    In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor ...

    Engine Mounting Removal and Installation
    Roll road Bracket 1. Remove the roll road bracket(A). Tightening torque Bolt (B) : 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ...

    Description and Operation
    Burglar Alarm Description The purpose of the burglar alarm function is to prevent intrusion into the vehicle when the vehicle is locked. ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.065