Kia Sorento: Filler-Neck Assembly Installation - Fuel Delivery System - Engine Control / Fuel SystemKia Sorento: Filler-Neck Assembly Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Fuel Delivery System / Filler-Neck Assembly Installation

1.
Install in the reverse order of removal.

Filler-neck assembly bracket installation nut :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Filler-Neck Assembly Removal
1. Lift the vehicle. 2. Disconnect the fuel filler hose (A). 3. Disconnect the ventilation tube quick-connector ( B). ...
Accelerator Pedal Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...
See also:

Components Location
1. PCV Valve 2. Canister 3. Purge Control Solenoid Valve (PCSV) 4. Fuel Tank Pressure Sensor (FTPS) 5. Canister Close Valve (CCV) 6. Fuel Level Sender (FLS) 7. Fuel Ta ...

External Amplifier Removal
External Amplifier 1. Remove the passenger seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove the external a ...

Rear Bumper Replacement
   ...

Copyright © xm.ksmanual.com 2014-2026 - 0.051