Kia Sorento: ATF Warmer Description - Hydraulic System - Automatic Transaxle SystemKia Sorento: ATF Warmer Description

Kia Sorento (XM, 2011-2015) Service Manual / Automatic Transaxle System / Hydraulic System / ATF Warmer Description

The ATF warmer is mounted on the valve body cover to reduce oil viscosity friction by increasing oil temperature under cold condition, which in turn improves fuel efficiency. It is serial mounted on the entry of the Electronic Throttle Controller (ETC), as shown in the diagram, and minimizes the effects of cabin heating system.
-
Engine coolant is used for circulating heat in order to heat and cool the transaxle oil.
-
Rapidly elevates the transaxle oil temperature during the initial cold start of the engine.
-
Prevents over heating of the transaxle oil while the vehicle is moving.
-
Transaxle oil warm-up and cooling can be done with a single system.
-
The water coolant and oil are separate in order to exchange heat.

Valve Body Installation
1. Install in the reverse order of removal.   ...
ATF Warmer Component Location
1. ATF Warmar 2. Bypass valve 3. ATF hose & pipe 4. Coolant hose & pipe...
See also:

Relay Box (Passenger Compartment) Inspection
Fuse 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit ...

Cooling Fan Removal and Installation
Cooling Fan Assembly 1. Disconnect the battery terminals. 2. Remove the air cleaner assembly. (Refer to Intake And Exhaust ...

Front Stabilizer Bar Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0508