Kia Sorento: Auto Head lamp leveling Unit Description - Head lamp leveling Device - Body Electrical SystemKia Sorento: Auto Head lamp leveling Unit Description

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Head lamp leveling Device / Auto Head lamp leveling Unit Description

According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from glare, aiming at safety driving.
Sensor mounting on the rear center arm drives the actuator mounting on the head lamp since sensing the input signal following the vehicle's statical changes.
Head lamp beam is automatically operated by chassis tilt.
Purpose of AHLS(Auto Headlamp Leveling System)
    Auto Head lamp leveling Unit Circuit Diagram
    ...
    Auto Head lamp leveling Unit Operation
    Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Height sensor signal change 3. ...
    See also:

    Evaporator Core Replacement
    1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater -"Heater Unit") ...

    OD Clutch & LR Brake Control Solenoid Valve (OD/C & LR/B_VFS) Specifications. OD Clutch & LR Brake Control Solenoid Valve (OD/C & LR/B_VFS) Components and Components Location
    OD Clutch & LR Brake Control Solenoid Valve (OD/C & LR/B_VFS) Specifications Specification Item Specification ...

    Components
    1. Piston ring 2. Snap ring 3. Piston 4. Connecting rod 5. Connecting rod upper bearing 6. Piston pin 7. Connecting rod lower bearing 8. Connecting rod bearing cap ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0891