Kia Sorento: Battery Sensor Removal - Charging System - Engine Electrical SystemKia Sorento: Battery Sensor Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Charging System / Battery Sensor Removal

1.
Disconnect the battery negative (-) cable.
2.
Disconnect the battery sensor connector (A).
3.
Remove the battery negative (-) cable after removing the bolts (B).

Battery Sensor Description
Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as there...
Battery Sensor Installation
1. Install in the reverse order of removal. Battery sensor cable installation bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~ 10.1 lb-ft) ...
See also:

Rear Upper Arm Removal
1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Oil Filter & Oil Cooler Components and Components Location
Components 1. Oil filter body2. O-ring3. Oil cooler ...

Ignition Coil Removal and Installation
Removal 1. Disconnect the battery negative ( - ) terminal. 2. Remove the engi ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0548