Kia Sorento: Blower Resistor Replacement - Blower - Heating,Ventilation And Air ConditioningKia Sorento: Blower Resistor Replacement

Kia Sorento (XM, 2011-2015) Service Manual / Heating,Ventilation And Air Conditioning / Blower / Blower Resistor Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Remove the passenger side crash pad under cover (A).

3.
Disconnect the connector and then remove the blower resistor (A) after loosening the mounting screws.

4.
Install in the reverse order of removal.
Blower Resistor Inspection
1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After ...
Power Mosfet (DATC) Inspection
1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced. (Aft...
See also:

Installation
1. Install in the reverse order of removal.    ...

DC DC converter Description and Operation. DC DC converter Components and Components Location
DC DC converter Description and Operation Description Due to the considerably more frequent occurrence of starting operations, the electrical load that occurs often l ...

System settings
Press the key Select [System] Select menu through TUNE knob Memory Information Displays currently used memory and total system memory. Select [Memory Information] OK The currently us ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0533