Kia Sorento: Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and
energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch
pinion engages the ring gear.
The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter
armature when the engine starts, the clutch pinion gear overruns.
| 1. Solenoid 2. Brush assembly 3. Armature 4. Over runing clutch |
...
Starting System
...
Troubleshooting
See also:
Power Door Mirror Actuator Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver door module.
(Refer to Body - "Front door")
...
Hill-start assist control (HAC)
A vehicle has the tendency to roll back on a steep hill when it starts to go
after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from rolling
back by applying the brakes automat ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026 - 0.0332