Kia Sorento: Engine start/stop button - Driving your vehicleKia Sorento: Engine start/stop button

Kia Sorento (XM, 2011-2015) Owner's Manual / Driving your vehicle / Engine start/stop button

Illuminated Engine Start/Stop button

Whenever the front door is opened, the ENGINE START/STOP button will illuminate


Whenever the front door is opened, the ENGINE START/STOP button will illuminate for your convenience.

The light will go off after about 30 seconds when the door is closed. It will also go off immediately when the theft-alarm system is armed.

Engine start/Stop button position

OFF

With automatic transaxle


With automatic transaxle

To turn off the engine (START/RUN position) or vehicle power (ON position), press the ENGINE START/STOP button with the shift lever in the P (Park) position. When you press the ENGINE START/STOP button without the shift lever in the P (Park) position, the ENGINE START/STOP button will not change to the OFF position but to the ACC position.

CAUTION

You are able to turn off the engine (START/RUN) or vehicle power (ON), only when the vehicle is not in motion. In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the ENGINE START/STOP button for more than 2 seconds or 3 times successively within 3 seconds. If the vehicle is still moving, you can restart the engine without depressing the brake pedal by pressing the ENGINE START/STOP button with the shift lever in the N (Neutral) position.

ACC(Accessory)

With automatic transaxle


With automatic transaxle

Press the ENGINE START/STOP button while it is in the OFF position without depressing the brake pedal. If the ENGINE START/STOP button is in the ACC position for more than 1 hour, the button is turned off automatically to prevent battery discharge.

ON

With automatic transaxle


With automatic transaxle

Press the ENGINE START/STOP button while it is in the ACC position without depressing the brake pedal. The warning lights can be checked before the engine is started. Do not leave the ENGINE START/STOP button in the ON position for a long time. The battery may discharge, because the engine is not running.

Start/Run

With automatic transaxle


With automatic transaxle

To start the engine, depress the brake pedal and press the ENGINE START/ STOP button with the shift lever in the P (Park) or the N (Neutral) position. For your safety, start the engine with the shift lever in the P (Park) position.

✽ NOTICE

If you press the ENGINE START/STOP button without depressing the brake pedal for automatic transaxle vehicles, the engine will not start and the ENGINE START/STOPbutton changes as follow:

OFF ➔ ACC ➔ ON ➔ OFF or ACC

✽ NOTICE

If you leave the ENGINE START/ STOP button in the ACC or ON position for a long time, the battery will discharge.

WARNING

Starting the engine with a smart key (if equipped)

1.Carry the smart key or leave it inside the vehicle.

2.Make sure the parking brake is firmly applied

3.Automatic Transaxle - Place the transaxle shift lever in P (Park). Depress the brake pedal fully.

4.Press the ENGINE START/STOP button while depressing the brake pedal.

5.In extremely cold weather (below 0

Illuminated ignition switch (if equipped)
Whenever a front door is opened, the ignition switch will illuminate for your convenience, provided the ignition switch is not in the ON position. The light will go off immediately when the ignition...
Manual transaxle (If equipped)
Manual transaxle operation The manual transaxle has 6 forward gears. This shift pattern is imprinted on the shift knob. The transaxle is fully synchronized in all forward gears so shifting to eithe...
See also:

Front Disc Brake Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

Opening the fuel filler door
Turn the engine OFF completely and ensure the vehicle is safely parked before attempting to refuel. Make sure the driver's door is unlocked, as the fuel door locking mechanism operates in s ...

Front Axle Assembly Repair procedures
Removal 1. Disconnect the (-) battery terminal. 2. Remove the front wheel and ...

Copyright © xm.ksmanual.com 2014-2026 - 0.055