Kia Sorento: Inspection - Rail Pressure Sensor (RPS) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Rail Pressure Sensor (RPS) / Inspection

1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
Condition
Output Voltage (V)
Idle
 Approx. 1.2
1,500 rpm
 2.0 ~ 2.2
6,300 rpm
 Approx. 2.8

Circuit Diagram
...
Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line. (Refer to the Fu...
See also:

Brake Pedal Components and Components Location
Components 1. Brake member assembly2. Stop lamp switch3. Brake pedal pad 4. Pedal stroke sensor5. Brake pedal arm ...

Installation
1. Combustion seal 2. Rubber washer 3. Support disc 4. O-ring ...

Cup holder. Seat warmer: (if equipped)
Cup holder ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0697