Kia Sorento: Installation
| •
|
Do not reuse the used injector fixing clip.
|
|
| •
|
Install the component with the specified torques.
|
| •
|
Note that internal damage may occur when the component
is dropped. If the component has been dropped, inspect before
installing.
|
|
| •
|
Apply engine oil to the injector O-ring.
|
| •
|
Do not reuse the used injector O-ring.
|
|
| •
|
Do not reuse the used bolt.
|
|
| •
|
When inserting the injector, be careful not to damage
the injector tip.
|
|
| •
|
Do not reuse the support disc.
|
| •
|
Do not reuse the injector rubber washer.
|
| •
|
When replacing the rubber washer, the steal plate (A)
part should be faced the cylinder installation part and the
rubber plate (B) part should be faced the injector body part.
|
|
| •
|
Do not reuse the combustion seal.
|
|
| •
|
When tightening the delivery pipe installation bolts,
tighten them in accordance with the order (
→  →  ) after
tightening with hand-screwed torque.
|
|
|
1. |
Install in the reverse order of removal.
|
In case of removing the high pressure fuel pump, high pressure
fuel pipe, delivery pipe, and injector, there may be injury caused by
leakage of...
The injector combustion seal should be replaced new one to prevent leakage
after removing the injector.
1.
Remove the combustion seal (A) with a wire cutter.
...
See also:
Head Lamps Installation
1.
Install the head lamp bulbs.
2.
Reassemble the head lamp bulb covers.
3.
Reassemble the head lamp assembly a ...
If you have a flat tire (with spare tire): (if equipped)
When dealing with a flat tire on your Kia Sorento, you can utilize the onboard emergency toolkit to safely swap it out for your spare wheel.
WARNING
Driving on a flat tire cause ...
Auto Head lamp leveling Unit Description
According to driving environment and loading state of vehicle, head lamp
lighting direction is changed to keep the driver's visibility range and to protect
the driver's vision from gl ...
Removal
Replacement
