Kia Sorento: Inspection - Accelerator Position Sensor (APS) - Engine Control System - Engine Control / Fuel SystemKia Sorento: Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS) / Inspection

1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.

Specification: Refer to
    1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...
    See also:

    Hill-start assist control (HAC)
    A vehicle has the tendency to roll back on a steep hill when it starts to go after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from rolling back by applying the brakes automat ...

    Adjustment
    Transaxle Control Module(TCM) Learning When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed. In the following case, TCM learni ...

    Rear Seat Assembly Repair Procedures
    Removal and Installation 2nd Seat Assembly [5/7] 1. Disconnect the battery negative ( - ) terminal. ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0531