Kia Sorento: Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Injector / Removal

In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair work right after engine stops.

1.	Turn the ignition switch OFF and disconnect the battery negative (-) cable.

Release the residual pressure in fuel line.

(Refer to Engine Mechanical System - "Coolant")

When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of “Release Residual Pressure in Fuel Line” work.

3.	Remove the delivery pipe & injector assembly. (Refer to Fuel Delivery System - "Delivery Pipe")

4.	Remove the fixing clip (A), and then separate the injector from the delivery pipe.

Inspection

1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminal...

Installation

1. Combustion seal 2. Rubber washer 3. Support disc 4. O-ring ...

Kia Sorento: Removal

Inspection

Installation

See also:

Manuals list