Kia Sorento: Instrument Cluster Removal - Indicators And Gauges - Body Electrical SystemKia Sorento: Instrument Cluster Removal

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Indicators And Gauges / Instrument Cluster Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel (A).
(Refer to Body - "Crash pad")

3.
Remove the cluster fascia (A) from the housing after removing 4 screws.

4.
Disconnect the cluster fascia connecters (A) and then remove the cluster.

Instrument Cluster Circuit Diagram
...
Instrument Cluster Installation
1. Connect the cluster connector. 2. Install the cluster assembly. 3. Install the cluster facia panel....
See also:

Transaxle Oil Temperature Sensor Specifications
▷ Type: Negative Thermal Coefficient Type(NTC) Temp.( ...

Description
Tread Lamp - Tire Under Inflation / Leak Warning. 1. Turn on condition A. When tire pressure is below a ...

SRS Control Module (SRSCM) Removal
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0781