Kia Sorento: Piston and Connecting Rod Reassembly - Cylinder Block - Engine Mechanical SystemKia Sorento: Piston and Connecting Rod Reassembly

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Cylinder Block / Piston and Connecting Rod Reassembly

  
    Connecting Rod 1. Check the connecting rod end play. Using a feeler gauge, measure the end play while moving the connecting rod back and forth. ...
    1. Crankshaft upper bearing 2. Thrust bearing 3. Crankshaft 4. Crankshaft lower bearing 5. Main bearing cap...
    See also:

    Trunk Trim Replacement
    Luggage Side Trim Replacement [7 seats]    ...

    In-car Sensor Replacement
    1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia panel (A). ...

    Front Hub / Knuckle / Tone Wheel Removal and Installation
    1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.059