Kia Sorento: Power Door Lock Switch Removal - Power Door Locks - Body Electrical SystemKia Sorento: Power Door Lock Switch Removal

Kia Sorento (XM, 2011-2015) Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch Removal

Driver Power Window Main Switch
1.
Disconnect the negative battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front door")
3.
Remve the screws(Inside:4EA, outside:1EA) from power window switch assembly (A) and connectors (B).

4.
Remove the power window switch assembly (A) from front door trim.

  
Be careful not to damage the hook when removing the switch module.
Passenger window switch
1.
Disconnect the negative battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front door")
3.
Remove the passenger window switch assembly (A) from front door trim.

4.
Remove the passenger window switch assembly (A) from front door trim.

  
Be careful not to damage the hook when removing the switch module.
Power Door Lock Actuators Inspection
Front Door Lock Actuator 1. Remove the front door trim. (Refer to Body - "Front door") 2. Remove the front door module. ...
Power Door Lock Switch Installation
Driver Power Window Main Switch 1. Install the driver power window switch assembly and connectors. 2. Install the front door trim. ...
See also:

Front Wheel Speed Sensor Components
1. Front wheel speed sensor 2. Front wheel speed sensor connector ...

Seat Heater Switch Inspection
Front Seat Heater Switch 1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel (A). (Refer to Body - &q ...

Fuel Tank Pressure Sensor (FTPS)
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge control solen ...

Copyright © xm.ksmanual.com 2014-2026