Kia Sorento: Radiator Removal and Installation - Cooling System - Engine Mechanical SystemKia Sorento: Radiator Removal and Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Cooling System / Radiator Removal and Installation

1.
Disconnect the battery terminals.
2.
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner")
3.
Remove the under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
4.
Loosen the drain plug, and drain the coolant.
Remove the radiator cap to speed draining.
5.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
6.
Remove the radiator upper hose(A) and lower hose(B).

7.
Remove the cooling fan.
(Refer to Cooling System - "Cooling Fan")
8.
Separate the condenser(A) from the radiator(B) and then remove the radiator assembly.

9.
Install in the reverse order of removal.
10.
Fill the radiator with coolant and check for leaks.
  
    1. Radiator 2. Radiator lower hose 3. Radiator upper hose 4. Radiator upper air guard 5. Radiator upper mounting bracket 6. Radiator lower mounting insulator...
    Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. Ap...
    See also:

    Trouble Symptom Charts
    Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surgin ...

    Front Disc Brake Inspection
    Front brake disc thickness check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

    AC Inverter Outlet Repair Procedures
    Removal 1. Remove the floor console assembly. (Refer to Body - “Floor Console Assembly”) ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0522