Kia Sorento: Rear Disc Brake Removal - Brake System - Brake SystemKia Sorento: Rear Disc Brake Removal

Kia Sorento (XM, 2011-2015) Service Manual / Brake System / Brake System / Rear Disc Brake Removal

1.
Remove the rear wheel & tire.

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.
Loosen the hose eyebolt (B) and caliper mounting bolts (C), then remove the rear caliper assembly (A).

Tightening torque:
Brake hose to caliper(B):
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
Caliper assembly to knuckle(C):
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)

3.
Remove the rear brake disc by loosening the screws (A).

Rear Disc Brake Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer...
Rear Disc Brake Replacement
1. Remove the rear wheel & tire. 2. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. 3. ...
See also:

EBD (Electronic Brake-force Distribution)
The EBD system (Electronic Brake force Distribution) as a sub-system of the ABS system is to control the maximum braking effectiveness by the rear wheels. It further utilizes the efficiency ...

Securing a child restraint system (CRS) with the LATCH anchors system
To properly install a LATCH-compatible Child Restraint System in either of the rear outboard seating positions of your Kia Sorento: Move the standard vehicle seat belt buckle completely ...

Fuel Sender Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). ...

Copyright © xm.ksmanual.com 2014-2026