Kia Sorento: Rear Disc Brake Replacement
| 1. |
Remove the rear wheel & tire.
|
| 2. |
Loosen the guide rod bolt (B) and pivot the caliper (A) up out
of the way.
|
| 3. |
Replace pad shim (D), pad retainers (C) and brake pads (B) in
the caliper carrier (A).
|
| 4. |
Compress the piston into the caliper body using the SST (09581-11000).
|
| 5. |
Place the caliper body (A) on the caliper carrier and tighten
the guide rod bolt (B).
|
| 6. |
Install the rear wheel & tire.
|
Rear Disc Brake Removal
Rear Disc Brake Inspection
Description
The Electronic Throttle Control (ETC) System consists of a throttle body
with an integrated control motor and throttle position sensor (TPS). Instead
of the traditional throttle cable, an Acc ...
Important Safety Notice
Proper service methods and repair procedures are essential for safe, reliable operation
of all motor vehicles as well as personal safety of the operator. The service procedures
and descriptions in ...
Removal
1.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
2.
Remove the battery and the battery tray.
...