Kia Sorento: Spark Plug Removal - Ignition System - Engine Electrical SystemKia Sorento: Spark Plug Removal

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Ignition System / Spark Plug Removal

1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plug (A).
  
    The combustion temporarily becomes unstable, due to the aged fuel and the carbon deposits accumulated on the spark plug(s) after long-term storage. [1st Method] 1. ...
    1. Install in the reverse order of removal. Tightening torque: 14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)...
    See also:

    Auto Head lamp leveling Unit Operation
    Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Height sensor signal change ...

    Anti-Pinch Strip Removal
    1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate side trim (A). (R ...

    Troubleshooting
    Basic Troubleshooting Basic Troubleshooting Guide Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The measured resistance at hig ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0778