Kia Sorento: Timing Chain Inspection - Timing System - Engine Mechanical SystemKia Sorento: Timing Chain Inspection

Kia Sorento (XM, 2011-2015) Service Manual / Engine Mechanical System / Timing System / Timing Chain Inspection

Sprockets, Hydraulic Tensioner, Chain Guide, Tensioner Arm, Timing Chain

1.
Check the CVVT sprocket, crankshaft sprocket teeth for abnormal wear, cracks or damage. Replace if necessary.
2.
Check a contact surface of the chain tensioner arm and guide for abnormal wear, cracks or damage.
Replace if necessary.
3.
Check the hydraulic tensioner for its piston stroke and ratchet operation. Replace if necessary.
4.
Check the timing chain for its elongation, abnormal wear or damage. Replace if necessary.
Timing Chain Removal
1. Remove the cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover") 2. Turn the crankshaft pulley and align its ...
Timing Chain Installation
1. Install the balance shaft chain. (Refer to Lubrication system - "Balance Shaft & Oil Pump") 2. Install the crankshaft chain sproc...
See also:

On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    ...

Gasoline Particulate Filter (GPF) Pressure Sensor Removal and Installation
Removal 1. Disconnect the battery negative (-) terminal. 2. Remove the engine ...

Power Door Lock Actuators Inspection
Front Door Lock Actuator 1. Remove the front door trim. (Refer to Body - "Front door") 2. Remove the front door module. ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0584