Kia Sorento: Alternator Disassembly - Charging System - Engine Electrical SystemKia Sorento: Alternator Disassembly

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Charging System / Alternator Disassembly

1.
Remove the alternator cover (A) using a screw driver after loosening the nuts (B).

2.
Remove the slip ring guide (A) and then loosen the mounting bolts and disconnect the brush holder assembly (B).

3.
Remove the pulley (A) using the SST (09373-27000) (B).

4.
Loosen the 4 through bolts (A).

5.
Disconnect the rotor (A) and cover (B).

6.
Reassembly is the reverse order of disassembly.
Alternator Installation
1. Install in the reverse order of removal. 2. Adjust the alternator belt tension after installation. (Refer to Engine Mechanical System - &q...
Alternator Reassembly
1. Reassemble in the reverse order of disassembly.   ...
See also:

Rear Wheel Speed Sensor Repair procedures
Removal [2WD] 1. Disconnect the (-) battery terminal. 2. Remove the rear whee ...

Power Door Mirror Switch Inspection
1. Remove the front door trim and power door mirror switch module (A). (Refer to Body - "Front door") 2. Check fo ...

Canister Close Valve (CCV) Inspection
Inspection 1. The evaporative emission control system can be more quickly diagnosed for problems with the KDS. (Refer to &q ...

Copyright © xm.ksmanual.com 2014-2026 - 0.0567