Kia Sorento: Alternator Reassembly

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Charging System / Alternator Reassembly

1.

Reassemble in the reverse order of disassembly.

•	When reassembling OAD pulley, replace with new OAD cap.

Alternator Disassembly

1. Remove the alternator cover (A) using a screw driver after loosening the nuts (B). 2. Remove the slip ring guide (A) and then loosen the mo...

Alternator Inspection

[Rotor] 1. Check that there is continuity between the slip rings (C). 2. Check that there is no continuity between the slip rings ...

See also:

Circuit Diagram
...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

Hazard Lamp Switch Inspection
Diagnosis With GDS 1. It will be able to diagnose defects of IPM with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self dia ...

Manuals list

Copyright © xm.ksmanual.com 2014-2026