Kia Sorento: Battery Installation - Charging System - Engine Electrical SystemKia Sorento: Battery Installation

Kia Sorento (XM, 2011-2015) Service Manual / Engine Electrical System / Charging System / Battery Installation

1.
Install in the reverse order of removal.

Battery (-)terminal installation nut:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
Battery (+)terminal installation nut:
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Battery mounting bracket installation bolt:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 Ib-ft)
Battery tray installation bolts:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 Ib-ft)

  
    1. Disconnect the battery (-) terminal and (+) terminal (A). 2. Remove the battery mounting bracket (B) and the insulation pad and then remove the bat...
    1. Turn the all electric devices OFF, and then turn the ignition switch OFF. 2. Close all doors except the engine hood, and then lock all doors. ...
    See also:

    A/C inverter: (if equipped)
    The high-capacity AC inverter supplies standard household-grade 115V/150W electrical power to operate approved portable electronic equipment and utility accessories during your travels. ...

    Immobilizer Control Unit Installation
    1. Install the immobilizer control unit after connecting the unit connector. 2. Install the crash pad lower panel. ...

    Cup holder
    WARNING - Hot liquids Do not place uncovered cups with hot liquid in the cup holder while the vehicle is in motion. If the hot liquid spills, you may burn yourself. Such a burn to the driver c ...

    Copyright © xm.ksmanual.com 2014-2026 - 0.0643