Kia Sorento: Accelerator Position Sensor (APS)
Kia Sorento (XM, 2011-2015) Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS)
Accelerator Position Sensor (APS) is installed on the accelerator pedal
module and detects the rotation angle of the accelerator pedal. The APS is one
of the most important sensors in engine control system, so it consists of the
two sensors which adapt individual sensor power and ground line. The second
sensor monitors the first sensor and its output voltage is half of the first
one. If the ratio of the sensor 1 and 2 is out of the range (approximately 1/2),
the diagnostic system judges that it is abnormal.
Installation
•
Install the component with the specified torques.
•
Note that in...
Specification
Accelerator
Position
Output Voltage (V)
APS1
APS2
C.T
0.7 ~ 0.8
0.275 ~ 0.475
W.O.T
3.8 ~ 4.4
1.75 ~ 2.35...
See also:
Replacing the Kia Sorento Smart Key Fob Battery
The integrated remote key fob of your Kia Sorento is powered by a high-capacity 3V lithium coin cell battery
engineered to deliver reliable performance for several years under normal daily usage. ...
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release
Residual Pressure in Fuel Line")
...
Circuit Diagram
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © xm.ksmanual.com 2014-2026