Kia Sorento: Alternator Removal
| 1. |
Disconnect the battery negative terminal.
|
| 2. |
Disconnect the air compressor connector (A) and the alternator
connector (B), and remove the cable from alternator "B" terminal (C).
|
| 3. |
Remove the drive belt (A) after turning the drive belt tensioner
(B) counter clockwise.
|
| 4. |
Full out the through bolt and then remove the alternator (A).
|
Alternator Circuit Diagram
•
COM signal - When
controlling the voltage generated, the ECM sends the target
voltage data to the alterna...
Alternator Installation
1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical System - &q...
See also:
Front Hub / Knuckle / Tone Wheel Disassembly
1.
Remove the brake disc (B) from the knuckle assembly (A).
Tightening torque:
4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3Ib-ft)
...
Reverse Parking Collision-Avoidance Assist malfunction and limitations. Reverse Parking Collision-Avoidance Assist malfunction
Reverse Parking Collision-Avoidance Assist malfunction
...
Special Service Tools
Tool (Number and name)
Illustration
Use
Alternator pulley remover wrench
(09373-27000)
Removal and installation of alternator pulley
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
